• Uno Plus 4 Challenge Rules
• Draw 4 Uno Card
• Uno Plus 4 On Plus 2
• Uno Plus 4 Card Rules

The OSEPP™ Uno R4 Plus board is the most popular Arduino board out in the Arduino market! This board uses the 8-bit, AVR, RISC-based ATmega328P microcontroller from Atmel.New features in R4:

New Features in R4:
• ATMEGA 16U2 Chipset
• Micro USB connector
• 4 additional 5v and GND power pins
• Additional analog pins A6 & A7
“Plus” Features:
• Replaced mini-USB connector with the more popular micro-USB connector
• removed the Molex connector
Highlights:
• 8-bit AVR RISC-based microcontroller running at 16 MHz
• Connects to a computer via a standard USB cable
• Flexible power source (USB or DC power)
• ICSP header for programming microcontroller
• Compatible with existing Arduino software libraries
• Compatible with all Arduino shields make for Arduino UNOs.
Features:

• The ATmega328P comes with the Arduino bootloader preloaded. There is an ICSP (In-Circuit Serial Programming) header for the ATmega328 to optionally replace the bootloader.
• As an added precaution, the board comes with a resettable polyfuse on the USB connection path. To prevent damage to the USB port, the fuse will trip when the current to the port exceeds 500 mA.
• The input and/or output pins are brought out to the headers, providing a convenient way to prototype projects without the need of soldering or desoldering.

Specifications

Uno Plus 4 Challenge Rules

Microcontroller	ATmega328P
Clock Speed	16 MHz
Flash Memory	32 KB
SRAM	2 KB
EEPROM	1 KB
Operating Voltage	5V
Input Voltage	6-12 V
Digital I/O Pin Count	14 (including 6 for PWM output)
Analog Input Pin Count	8
Other Connections	micro-USB ICSP for ATmega328p DC power connector 4-pin latchable I2C connector
Dimensions	2.95 x 2.13 x 0.61 inches (75.0 x 54.0 x 15.5 mm)
Power Source	USB or external DC power supply

4-6-8-10 Players- If several couples wish to play 'UNO,' seat them alternately, one man, one woman, etc., and play the men versus the women. Once a man or woman goes out, all teammates throw in their cards and the opposing team totals the points in all of their hands. The OSEPP™ Uno R4 Plus board is the most popular Arduino board out in the Arduino market! This board uses the 8-bit, AVR, RISC-based ATmega328P microcontroller from Atmel.New features in R4: New Features in R4:. ATMEGA 16U2 Chipset. Micro USB connector. 4 additional 5v and GND power pins. Plus4 Credit Union is committed to serving all persons within our field of membership, including those with disabilities. We strive to make not only our physical branches accessible, but also to conform to WCAG 2.0 guidelines for website accessibility. Our efforts are ongoing including frequent testing and updates to improve accessibility.

Notes:
This board is based off of the Arduino Uno designed by Arduino.cc, and is released under the Creative Commons Attribution Share-Alike License. The original design can be found at http://arduino.cc/en/Main/ArduinoBoardUno

Downloads

OSEPP Uno R4 Schematic

Stock Code	Product Name
UNO-04	OSEPP™ Uno R4 Plus

Learning Center:

What You Need

• Arduino Software (http://arduino.cc/en/Main/Software)
• USB-to-mini-USB
• PC/Mac with a USB port

Uploading Your First Sketch

1. Get the Arduino software if you have not already
   1. Download from http://arduino.cc/en/Main/Software
   2. Unzip the zip file to somewhere like C: (on Windows), so you will end up with a folder like C:arduino-0022
2. Prepare for serial communication
   1. Connect the USB-B end of the cable into the board
   2. Connect the other end of the cable into a USB port on your PC/Mac
   3. If your computer prompts for drivers, point it to the “driversFTDI USB Drivers” subfolder of the Arduino software, e.g. “C:arduino-0022driversFTDI USB Drivers”
   4. You should now see the LED labeled ON near the reset button light up
3. Load the sketch
   1. Open the Arduino software
   2. Open the LED blink sketch: File menu > Examples > Basics > Blink
      
   3. Select the Arduino/Genuino Uno: Tools > Board > Arduino/Genuino Uno
      
   4. Select the serial port: Tools > Serial Port. This is the serial port for the board’s built-in FTDI. If you do not know which one this is, you can find out by going into Device Manager > Ports (COM & LPT), and look for a “USB Serial Port (COMx)”
      
   5. Upload the sketch: File > Upload to I/O Board
   6. Wait for the “Done uploading” message in the bottom blue status bar
4. The LED labeled L near pin 13 should now blink slowly
   
5. Congratulations! You have successfully uploaded your first sketch to your board.

Alternative Install Guides

• Windows :http://arduino.cc/en/guide/windows

• Mac :http://arduino.cc/en/guide/macOSX

• Linux :http://playground.arduino.cc/Learning/Linux

Also the main Arduino page has troubleshooting guides for the basic errors encountered : http://arduino.cc/en/guide/troubleshooting

Draw 4 Uno Card

Uno Plus 4 On Plus 2

Feb 7 trending

Uno Plus 4 Card Rules

• 1. Watermelon Sugar
• 2. Ghetto Spread
• 3. Girls who eat carrots
• 4. sorority squat
• 5. Durk
• 6. Momala
• 7. knocking
• 8. Dog shot
• 9. sputnik
• 10. guvy
• 11. knockin'
• 12. nuke the fridge
• 13. obnoxion
• 14. Eee-o eleven
• 15. edward 40 hands
• 16. heels up
• 17. columbus
• 18. ain't got
• 19. UrbDic
• 20. yak shaving
• 21. Rush B Cyka Blyat
• 22. Pimp Nails
• 23. Backpedaling
• 24. Anol
• 25. got that
• 26. by the way
• 27. Wetter than an otter's pocket
• 28. soy face
• 29. TSIF
• 30. georgia rose